Filtration equipments:
In order to ensure the quality of plating, the plating solution needs to be filtered regularly. The filter is the most commonly used filtration equipment in chemical industry, some plating works request the filter works circulate continuous loop filter in the work. Customers need choose a plating filter based on the tank volume and the plating process details.
Cathode shift or stirring device:
Most plating types or at least some of them request the cathode works in a swing state, because by this way can increase the working current, lead the plating solution to play a proper role (usually light brightness and dispersing ability), Also it can 
prevent the cusp, corner dusty, charred. Cathode shifting can be replaced by mechanical or air agitation in some kind of plating types, Mechanical agitation is the use of corrosion-resistant materials to do the mixer, usually driven by the motor, but the speed can not be too high. Air agitation is used in addition to the oil filter to the compressed air.
Heating or cooling system:
Because the electroplating solution needs to work at a certain temperature, it should be equipped with heating equipment for the plating bath. For example, bright nickel needs plating bath temperature with maintain at 50 degrees, and with chrome plating needs temperature of 50 to 60 degrees Celsius. At the same time, acidic bright copper plating or bright silver plating and requires a temperature of 30 degrees Celsius. Such of the process required to heat exchange equipment to satisfy them. For heating generally use straight to heating mode.
Plating bath:
The plating tank must be equipped with accessories including the anode and the cathode basket or anode basket hook, electrode rod, power supply connecting lines. Some factories in order to save investment without anode baskets, linked directly to the anode to hang in the plating tank can also be ok. but at least you should set on the anode casing.
Most of the anode basket is made of titanium material, and a few kinds of stainless steel can be made of stainless steel or steel.
Electrode rods are used to suspend the anode and cathode and to connect with the power of the conductive rod. Usually it is made of red copper or brass rod, slightly longer than the plating tank, according to the current size to determine the diameter, but at least in more than 5cm.
Power connection line, the key is to assure the current through the need. The best is the red copper, is also useful for multi strand cable, then we must conform to the requirements of its cross-sectional area.
Plating hangers:
Plating hanger is the most important auxiliary instrument of electroplating processing. It is a tool to ensure that the products are connected to the cathode with good connections, and also has a direct impact on the distribution of the plating layer and the efficiency of the work. It has been a professional manufacturer and supplier of hanger provides the industry and general rack according to the needs of the user design and custom-made plating hanger.
